G-JF0J80120004-SZ217
1,Inspection of Antenna ModeG-JF0J80120004-SZ217 will be according to this specification
2,Antenna size,combination and tolerance will be according to our attached drawing
3,Externals:
Exterior of antenna is to be free from any conspicuous scratches,dents or stains.
4, Mechanical Features
4.1 The force required to collapse antenna shall be from 0.1 kg to 2.5 kg at a rate
of 6-8 times/minute for over 1000 times
4.2 Antenna must extend and collapse smoothly after 7.0kg weight is suspended
from tip of extended antenna for one minute
4.3 Antenna must extend and collapse smoothly after a 0.2 kg weight is applied
at tip of extended antenna and held in a horizontal position for 1 minute
4.4 Flexing torque shall be 1.0 kgfcm to6.0 kgfcm
Atfter a test of 500 cycles of flexing torque is performed at the rate or less than
6 per minute,the extended antenna must suppore itself in any desired position.
4.5 Roating torque shall be 1.0 kgfcm 6.0 kgfcm
Test of 6-8 cycle/min will run for 500 times upon completion,extend pole and
should remain at designated position
5, Checking
(2) Size and Tolerance AQL 0.65
(3) Externals AQL 1.5
(4) Mechanical Features
4.1 Damage Test AQL 1.5 ( n=5,A=0,R=1 )
4.2 Damage Test ( n=5,A=0,R=1 )
4.3 Damage Test ( n=5,A=0,R=1 )
4.4 Damage Test AQL 1.5 ( 2≤n≤8,A=0,R=1 )
4.5 Damage Test AQL 1.5 ( 2≤n≤8,A=0,R=1 )